Linked by Andrew Youll on Sun 14th Aug 2005 15:23 UTC, submitted by Michael David
PC-BSD This is the 4th installment of a series of guides to configuring and installing PC-BSD. The past 3 parts can be found here. In this part of the guide they cover installing Amarok, Limewire, Azureus and Streamtuner.
Thread beginning with comment 18185
To read all comments associated with this story, please click here.
re:RE: Re: Too much hassle (troll)
by on Sun 14th Aug 2005 19:45 UTC

Member since:

I am trolling? When I need to change my default gateway, I would go and read the networks section in manual

Address of Ethernet-Card:
xxx.112.xx.33/255.255.x55.x28

Address of Default-Gateway:
xxx.112.xx.1/255.255.x55.x48

The following lines need to be added to /etc/rc.conf, where vr0 is the device name of my network card, of course this name varies depending on the card type:

static_routes="GwNet GwHost"
route_GwNet="add -net xxx.112.xx.0 -netmask 255.255.255.2xx -interface vr0"
route_GwHost="add -net 0.0.0.0 -netmask 0.0.0.0 -gateway xxx.112.xx.1"

Afterwards restart network or machine.

That's it :-)

Reply Score: 1