Linked by David Adams on Mon 16th May 2011 02:31 UTC
Hardware, Embedded Systems HP scientists have made a small breakthrough in the development of a next-generation memory technology called memristors, which some see as a potential replacement for today's widely used flash and DRAM technologies. In a paper to be published Monday in the journal "Nanotechnology," scientists report that they have mapped out the basic chemistry and structure of what happens inside a memristor during its electrical operation.
Thread beginning with comment 473179
To view parent comment, click here.
To read all comments associated with this story, please click here.
RE: Good.
by Spiron on Mon 16th May 2011 07:02 UTC in reply to "Good."
Spiron
Member since:
2011-03-08

Which appliances are so important that you can't be patient and wait a second, really. I'm not attacking the memristors, they look fantastic, but I'd like you to name ONE device where it is ESSENTIAL that it starts in less than a second??

Reply Parent Score: 1

RE[2]: Good.
by shiny on Mon 16th May 2011 07:52 in reply to "RE: Good."
shiny Member since:
2005-08-09

If it takes a second to flip a single bit it IS kinda slow ;)

Reply Parent Score: 5

RE[3]: Good.
by Neolander on Mon 16th May 2011 08:30 in reply to "RE[2]: Good."
Neolander Member since:
2010-03-08

Yeah, that means a data transfer rate of 3.7 MB/year if I did my calculation right ;)

Of course, they could put them in parallel to make the thing faster, but they couldn't make it dramatically faster.

Edited 2011-05-16 08:31 UTC

Reply Parent Score: 2

RE[2]: Good.
by Doc Pain on Mon 16th May 2011 08:29 in reply to "RE: Good."
Doc Pain Member since:
2006-10-08

[...] I'd like you to name ONE device where it is ESSENTIAL that it starts in less than a second??


Think about specific equipment in healthcare, were "instand-on-and-running" is preferred. I could name more examples, but you requested only one. :-)

Reply Parent Score: 2

RE[2]: Good.
by Laurence on Mon 16th May 2011 23:26 in reply to "RE: Good."
Laurence Member since:
2007-03-26

Which appliances are so important that you can't be patient and wait a second, really. I'm not attacking the memristors, they look fantastic, but I'd like you to name ONE device where it is ESSENTIAL that it starts in less than a second??

We're talking about the change of state for a single bit, not how quickly a device would power on.

A second per bit would mean you could read this sentence quicker than the computer could: there's 8 bits per ASCII character thus it would take 8 seconds to read each character. In fact just reading the word "character" would take current memristors over a minute.

So clearly the current spec's fall far short of any usable speed. But this is technology is still in its infancy - so given time this could become a tempting new upgrade.

Reply Parent Score: 4

RE[2]: Good.
by demetrioussharpe on Tue 17th May 2011 06:34 in reply to "RE: Good."
demetrioussharpe Member since:
2009-01-09

Which appliances are so important that you can't be patient and wait a second, really. I'm not attacking the memristors, they look fantastic, but I'd like you to name ONE device where it is ESSENTIAL that it starts in less than a second??


Are you serious? That's 1 second to flip between states. One second for a memory location to flip from 0 to 1. Ok, now, remember that this is something that usually happens millions of times over & over within that one second. So, yes, it's a big deal that these things must become faster. Could you even imagine how slow today's computers would be if they used this technology in it's current state while running on the latest OS from Redmond??? Pay more attention to what's going on.

Reply Parent Score: 3