Linked by Thom Holwerda on Sat 22nd Dec 2012 00:38 UTC, submitted by sonic2000gr
Thread beginning with comment 546135
To view parent comment, click here.
To read all comments associated with this story, please click here.
To view parent comment, click here.
To read all comments associated with this story, please click here.




Member since:
2005-08-10
ftp://ftp.pcbsd.org/pub/handbook/9.1/handbook_en_ver9.1.html#__Ref...
2.6 PC-BSD® Live Mode
Beginning with PC-BSD® 9.1, Live Mode is a read-write live image that is only available for USB media. The uncompressed live image is about 4GB in size, but you will want to write it to a USB device that will provide sufficient room for the files that you wish to save and any applications that you wish to install.
NOTE: the speed of Live Mode is dependent upon the quality of the USB device. If you are purchasing a device, look for one that is advertised as "high speed".
To use PC-BSD® Live Mode, download the live USB version. Once you have written the image file to a USB media, boot the system with the USB device inserted. Assuming your BIOS has been set to boot from that device, you should see some startup messages followed by the PC-BSD® graphical boot menu, shown in Figure 2.6a.