Linked by Thom Holwerda on Fri 30th Nov 2012 21:54 UTC
Thread beginning with comment 543789
To view parent comment, click here.
To read all comments associated with this story, please click here.
To view parent comment, click here.
To read all comments associated with this story, please click here.
Features
Linked by Thom Holwerda on 05/18/13 21:33 UTC
Linked by David Adams on 05/16/13 4:23 UTC
Linked by Thom Holwerda on 05/11/13 21:41 UTC
Linked by Thom Holwerda on 05/08/13 14:22 UTC
Linked by Thom Holwerda on 05/02/13 15:28 UTC
Linked by Thom Holwerda on 04/29/13 21:06 UTC
Linked by Thom Holwerda on 04/24/13 22:24 UTC
Linked by Thom Holwerda on 04/18/13 11:21 UTC
Linked by Thom Holwerda on 04/16/13 9:29 UTC
Linked by Thom Holwerda on 04/15/13 22:44 UTC
More Features »
Sponsored Links



Member since:
2005-07-22
Good points but you have missoed one essential factor.
In a drawing office you are essentially dealing with MATTE media. Thus reflections from the overhead lighting don't come into play.
As soon as you have a large flat touch tilted surface that AFAIK (and probably due to current technology) you will suffer from a myriad of reflections that will effectively stop you from doing much productive work.
Once the boffins come up with a resilient non reflective coating for BOTH surfaces of the glass then we be getting somewhere. Why both surfaces?
Optics 101. As light enters glass some of it act as if the glass is a prism (think the front cover of Dark Side of the Moon if you are old enough). This is due to the angles at which the wavelengths of light strike the surface. Then glass is a two way medium.
The screen makers can learn a think or two from the Camera Lens designers. They've been battling with this subject for decades.
We aren't there yet but I have no doubt that in time it will become an affordable reality.
Will I take it up? I doubt it as I'm less than 5 years away from retirement.