Earlier this month, Microsoft released new preview updates with changes to make its operating systems compliant with European Union regulations. Those changes include the ability to uninstall Edge, decouple the OS from Bing, turn on third-party news feeds in Widgets, and more. Sadly, only EU citizens can enjoy those changes without messing with their PCs’ software intestines. Other people must tweak Windows Registry to spoof their location, which can lead to unnecessary complications. Luckily, there is a much simpler method that does not require editing the registry or faking your location. As it turned out (via Deskmodder), Windows manages new region policies using a JSON file inside the system32 folder. Modifying that file allows force-enabling specific features in unsupported regions. What follows is a 19 step process involving taking ownership of protected system files, dowloading additional tools, editing the registry, a few reboots, and more. A very simple process. So anyway if you want to remove Firefox from Fedora or Ubuntu or whatever, just run sudo dnf remove firefox or sudo apt remove firefox respectively, because as we all know, Linux is very hard to use and just not ready for desktop use. Good for servers, though. The tech world is a clown show.
If you read the initial reviews of Apple’s new M3-based Macs, you’d be forgiven for thinking little had changed in their CPU cores, apart from a rejigging of numbers and an increase in the maximum frequency of their P cores. As my MacBook Pro 16-inch M3 Pro arrived three days early, this article presents a tentative first look at what has changed in their CPU cores, and from that, how you might choose the right chip for your next Apple silicon Mac. Like Apple, I’m going to make comparison between M1 and M3 chips, as in most respects discussed here, M2 CPU cores didn’t change as much from those in the M1, and I’ve had and tested four different M1 models. As the introduction suggests, there’s more here than many seem to think.
With OpenSolaris and derivatives such as illumos, we gained the ability to build a whole IT infrastructure in a single box, using virtualized networking (crossbow) to build the underlying network and then attaching virtualized systems (zones) atop virtualized storage (zfs). Some of this was present in Solaris 10, but it didn’t have crossbow so the networking piece was a bit tricky (although I did manage to get surprisingly far by abusing the loopback interface). In Tribblix, I’ve long had the notion of a router or proxy zone, which acts as a bridge between the outside world and a local virtual subnet. For the next release I’ve been expanding that into something much more flexible and capable. I’m continuously impressed by the work Peter Tribble is putting into Tribblix. Maintaining a distribution of something like OpenSolaris is hard enough as it is, but to then also add various unique functions and capabilities, while also maintaining support for SPARC, is just amazing.
We talked about Zork yesterday, and how the code for interpreters for the game was found and published on Github. Today we have a blog post detailing how to actually use one of these interpreters, the one for the PDP-11. Ok so what or where to do this?! First you need SIMH or any other good PDP-11 emulator, a copy of RT-11, and of course the source to the interpreter oddly enough named PDP11.ZIP. Just keep in mind that this is NOT a pk-zip file, it’s a text file. It’s Macro-11 assembler source. And it goes on from there. This is using an emulator, but if you’re lucky enough to have a real PDP-11 you can probably get all of this running, too.
Jason Scott posted the source code for all the Infocom games in 2019. This was pretty awesome. Everybody who is interested in that stuff cheered, and now it’s part of the common knowledge of Infocom. If you’re researching the history of those games, or want to study their design, you can dig in. So the game source was big news. Infocom’s interpreter source, however, remained obscure. This was the game-playing software for each platform: the Apple 2 interpreter, the Commodore 64 interpreter, and so on. A particular Infocom game release (“Zork 3 for the C64”, say) was a floppy containing the C64 interpreter and the Zork-3 game file. Boot the floppy, the interpreter starts up; it loads the game data and the game begins. The code for the interpreter, however, was never released as open source – until now. Andrew Plotkin posted all of the code on Github, followed later by an additional code dump by David Fillmore.
There has been quite a bit of documentation about exploiting the CANON Printer firmware in the past. For some more background information I suggest reading these posts by SYNACKTIV, doar-e and DEVCORE. I highly recommend reading all of it if you want to learn more about hacking (CANON) Printers. The TL;DR is: We’re dealing with a Custom RTOS called DRYOS engineered by CANON that doesn’t ship with any modern mitigations like W^X or ASLR. That means that after getting a bit acquainted with this alien RTOS it is relatively easy to write (reliable) exploits for it. Having a custom operating system doesn’t mean it’s more secure than popular solutions.
EE Journal reports: National Instruments (NI) recently released a new version of its LabView test automation programming environment for the latest Apple Macintosh computers based on the Arm-based Apple M1 CPU/GPU SoC. At the same time, NI let its customers know that this release would be the last one for Apple Macintosh computers, sending a shock through some portion of the company’s customer base. LabView’s importance to test and measurement cannot be overstated. It was the first graphical programming language designed exclusively for test systems. The language has been continually expanded and improved for nearly 40 years and features more than 7000 software drivers for instruments from many vendors as well as support for custom, FPGA-based instruments. LabView supports many instrument interfaces starting with IEEE-488 and extending to MXI, PXI, USB, Ethernet, and probably a few more interfaces that don’t immediately come to mind. It’s a shock to many and will likely punish higher education students and a chunk of the scientific and research segment which is still Mac dominant.
After a few minor delays, FreeBSD 14.0 has officially been released. The highlights according to the FreeBSD team itself: For more details, you can dive into the release notes, and if you’re already using FreeBSD you know exactly how to upgrade.
Firefox users across the internet say that they are encountering an “artificial” five-second load time when they try to watch YouTube videos that exists on Firefox, but not Chrome. Google, meanwhile, told 404 Media that this is all part of its larger effort against ad blockers, and that it doesn’t have anything to do with Firefox at all. I’m sure it doesn’t, Google.
While Elementary OS commits to Wayland, the development team of the Budgie desktop is changing course and will work with the Xfce developers toward Budgie’s Wayland future. There is general consensus now that the future of graphical desktops on Linux lies in Wayland rather than X11, but the path is still not a smooth and easy one. While in Latvia for the Ubuntu Summit, the Reg FOSS desk met with the developers behind Ubuntu Budgie, who told us that the Budgie project is charting a new course toward the brave new Wayland world. It seems that using EFL – the Enlightenment Foundation Libraries – wasn’t the right choice for Budgie, and so they’re now exploring working with Xfce on their Wayland efforts, instead. Considering Enlightenment’s desktop Linux presence is negligible, at best, joining forces with Xfce so that both Xfce and Budgie can make progress on Wayland faster seems like the more optimal choice for the wider desktop Linux community.
Today we want to focus on what came next, Symbian Anna, which arrived a year after the launch of Symbian^3 (Symbian^2 launched only in Japan). Anna was unveiled in early 2011 alongside the Nokia X7 and Nokia E6. The E6 was a bar phone with a QWERTY keyboard (and a 2.45″ touch display), but the X7 was all touch (4.0″ display). Even better, owners of certain older Nokias would receive Anna as an update, that was the case for the Nokia N8 and E7. The Nokia C7 and C6-01 got it too. I have a few Symbian Anna and Belle (its successor) devices, and they’re not exactly great. The software is slow, cumbersome, clunky, and unpleasant to use, and simply no competition for the iPhone and Android, even at the time they came out. They’re fun novelties to play with now, but I genuinely feel sorry for the people who bought into these things back when they were new, thinking they’d get something on the level of the iPhone or Android.
The seL4 microkernel is currently the only kernel that has been fully formally verified. In general, the increased interest in ensuring the security of a kernel’s code results from its important role in the entire operating system. One of the basic features of an operating system is that it abstracts the handling of devices. This abstraction is represented by device drivers – the software that manages the hardware. A proper verification of the software component could ensure that the device would work properly unless there is a hardware failure. In this paper, we choose to model the behavior of a device driver and build the proof that the code implementation matches the expected behavior. The proof was written in Isabelle/HOL, the code translation from C to Isabelle was done automatically by the use of the C-to-Isabelle Parser and AutoCorres tools. We choose Isabelle theorem prover because its efficiency was already shown through the verification of seL4 microkernel. Some light reading that would’ve been for the weekend had I not gotten sick and unable to work on OSNews much.
In the best case, we may be able to avoid feeding the data through the compositing pipeline of the compositor as well, if the compositor supports direct scanout and the dmabuf is suitable for it. In particular on mobile systems, this may avoid using the GPU altogether, thereby reducing power consumption. I don’t understand what’s happening but it seems like a good idea? Can anyone help?
Apple has officially ceased the sale of OS X Lion 10.7 and Mountain Lion 10.8 from its online store. That’s it. That’s the post.
OpenVMS on x86 is now available for hobbyists! Almost a year after the official release. This is a part 1 of my getting started guide, showing you how to install OpenVMS on VirtualBox on Windows 10/11. More parts will follow, documenting license installation, network setup, ssh, application installation etc. If you want to give OpenVMS for x86 a try, this is the series of articles to read and follow along with. Excellent work by Remy van Elst.
A few months ago, I talked about the only PC ever shipped with BeOS preinstalled, the Flora Prius from Hitachi. However, due to illegal pressure from Microsoft, Hitachi disabled the special bootloader required to boot into BeOS, so while the best operating system ever made was right there on the hard drive, buyers couldn’t actually use it without manually restoring the bootloader and BeOS partitions. Of course, I now have to try and find a working example of this Hitachi Flora Prius computer line. They were apparently only sold in Japan, so the odds of finding one anywhere seem slim, at best. It doesn’t help that most people who bought one of these had no idea BeOS was installed or what BeOS even was, so the historical significance was lost on them. I also think these weren’t particularly noteworthy computers otherwise – most likely one of the many dime-a-dozen beige boxes sold all over the world. Searches on eBay and Japanese auction sites yield no results. I got an e-mail today from an OSNews reader, informing me of something quite rare. On the Japanese auction site mercari.com, someone is selling a BeBox, which in and of itself is already a very rare occurrence, as few BeBoxen were ever sold (1800 in total). To further add to the rarity, it’s the dual 133 MHz model, which is the rarer of the two configurations (800 pieces sold). These machines don’t come up for sale very often, and I’m pretty sure the seller is going to net a good price for this museum piece, which seems to be in almost pristine condition, without scratches of scuffs. The price is set at ¥950000 (€5821) excl. shipping (shipping costs to e.g. Europe or the US would be substantial), but I’m pretty sure the seller could ask for more. Seeing a BeBox for sale is already quite exciting, but browsing through the accompanying pictures, there’s something even rarer: documentation and software CD-ROMs for the Hitachi Floria Plus 330j and BeOS. The machine itself is not part of the auction, but even seeing the documentation and CD-ROMs for it is entirely unique, and most likely something we won’t be seeing anywhere else anytime soon. Since the Floria Plus was sold as a generic, uninteresting PC, probably long forgotten and scrapped by most people, I doubt one will ever be found. The documentation and software in this auction might be one of the last surviving tangible relics of the only PC ever sold with BeOS preinstalled.
The PARC facility also is known for the invention of Ethernet, a networking technology that allows high-speed data transmission over coaxial cables. Ethernet has become the standard wired local area network around the world, and it is widely used in businesses and homes. It was honored this year as an IEEE Milestone, a half century after it was born. Truly one of the success stories of the technology world. Sure, those first Ethernet cables and accessories have changed a lot over the decades, but we’re still using it to this day, and we’ll be using it for many more decades to come.
Shortly after announcing the end of three services, one of which is as old as MS-DOS, Microsoft deprecated the Tips app. Now, another utility is about to get the axe: Microsoft has updated its Windows documentation again, detailing the end of the story for Steps Recorder (psr.exe). Steps Recorder is an old utility from the Windows 7 era that lets you, as the name implies, record your steps while doing something in Windows. Although long abandoned, Steps Recorder is a handy tool for describing to your grandma how to perform specific actions in Windows, troubleshoot apps, or report bugs. Steps Recorder is simple and very effective, and you can launch it by pressing Win + R and typing psr. With Windows being as massively popular as it is, even removals of weird, obscure utilities and services that small percentages of Windows users used, still means hundreds of thousands of people can be affected. So, let’s pour one out for psr.
In order to comply with the EU’s Digital Markets Act, Microsoft is planning a number of changes to Windows to comply with this new legislation. Ars sums them up nicely: All of the above will be exclusive to the EU/EEA, so Windows users elsewhere are out of luck.
With these changes in place, we’ve seen support for Manifest V3 increase significantly among the extension developer community. Specifically, we are encouraged by our ongoing dialogue with the developers of content blocking extensions, who initially felt Manifest V3 could impact their ability to provide users with the features they’ve come to expect. Google has made several changes to Manifest V3 specifically to ease concerns among developers of content blocking extensions, and it seems those changes have been positively received. The maximum number of active rulesets has been increased, as well as the number of dynamic rules, which are rules ad blocker developers can change and update without having to update the extension as a whole. Regardless of these changes, I would still advise everyone to get a Raspberry Pi or whatever and run Pi-Hole – this will block ads for your entire network, and all devices, regardless of browser or operating system.
Guest post by